基于SPCE061A实现的语音数控电源

本文通过选用一教具有语音功能的单片机(SPCE061A)设计并实现了一台数控直流稳压电源.该电源的输出电压在0～ 9.9V的范围内,通过按键可以实现步进0.1V和输出电压预置,同时结合SPCE061A单片机在语音方面的优势,还可以实现电压播报和语音控制的输出电压预置.在保证数控电源基本功能的条件下,增强了系统的人性化环境.     

Algorithm for a class of constrained weight least square problems and applications

An algorithm, based on ordinal optimisation (OO) and sensitive theories, is presented to solve a class of constrained weight least square problems with continuous and discrete variables. the proposed algorithm can cope with an enormous amount of computational complexity problems and has a high probability of obtaining a good enough solution according to the oo theory. this method has some advantages, such as computational efficiency, numerical stability and the superiority of the good enough solution. the proposed algorithm is explicit, compact and easy to program. test results demonstrate that the proposed approach is more computational-efficient than other existing approaches for solving constrained-state estimation problems with continuous and discrete variables on the ieee 30-bus and the ieee 118-bus systems.     

Thermoplastic polyvinyl alcohol/multiwalled carbon nanotube composites: Preparation,mechanical properties,thermal properties,and electromagnetic shielding effectiveness

This study uses the solution mixing method to combine plasticized polyvinyl alcohol (PVA) as a matrix, and multiwalled carbon nanotubes (MWCNTs) as reinforcement to form PVA/MWCNTs films. The films are then laminated and hot pressed to create PVA/MWCNTs composites. The control group of PVA/MWCNTs composites is made by incorporating the melt compounding method. Diverse properties of PVA/MWCNTs composites are then evaluated. For the experimental group, the incorporation of MWCNTs improves the glass transition temperature (T_g), crystallization temperature, T_c), and thermal stability of the composites. In addition, the test results indicate that composites containing 1.5 wt % of MWCNTs have the maximum tensile strength of 51.1 MPa, whereas composites containing 2 wt % MWCNTs have the optimal electrical conductivity of 2.4 S/cm, and electromagnetic shielding effectiveness (EMI SE) of ?31.41 dB. This study proves that the solution mixing method outperforms the melt compounding method in terms of mechanical properties, dispersion, melting and crystallization behaviors, thermal stability, and EMI SE. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43474.     

Enhanced output power of near-ultraviolet InGaN-GaN LEDs grown on patterned sapphire substrates

Near-ultraviolet nitride-based light-emitting diodes (LEDs) with peak emission wavelengths around 410 nm were fabricated onto c-face patterned sapphire substrates (PSS). It was found that the electroluminescence intensity of the PSS LED shown 63% larger than that of the conventional LED. For a typical lamp-form PSS LED operating at a forward current of 20 mA, the output power and external quantum efficiency were estimated to be 10.4 mW and 14.1%, respectively. The improvement in the light intensity could be attributed to the decrease of threading dislocations and the increase of light extraction efficiency in the horizontal direction using a PSS.     

Efficiency improvement of near-ultraviolet InGaN LEDs using patterned sapphire substrates

The use of conventional and patterned sapphire substrates (PSSs) to fabricate InGaN-based near-ultraviolet (410 nm) light-emitting diodes (LEDs) was demonstrated. The PSS was prepared using a periodic hole pattern (diameter: 3 /spl mu/m; spacing: 3 /spl mu/m) on the (0001) sapphire with different etching depths. From transmission-electron-microscopy and etch-pit-density studies, the PSS with an optimum pattern depth (D/sub h/=1.5 /spl mu/m) was confirmed to be an efficient way to reduce the thread dislocations in the GaN microstructure. It was found that the output power increased from 8.6 to 10.4 mW, corresponding to about 29% increases in the external quantum efficiency. However, the internal quantum efficiency (@ 20 mA) was about 36% and 38% for the conventional and PSS LEDs, respectively. The achieved improvement of the output power is not only due to the improvement of the internal quantum efficiency upon decreasing the dislocation density, but also due to the enhancement of the extraction efficiency using the PSS. Finally, better long-time reliability of the PSS LED performance was observed.     

A Gunn-Diode Active Leaky-Wave Frequency Scanning Antenna

A frequency tunable active leaky-wave scanning antenna using Gunn-diode voltage control oscillator (VCO) as source is developed. The frequency tuning controlled by changing either the varactor diode dc bias or the Gunn diode dc bias is demonstrated. The measured scanning angle of active antenna is close to 15 degree as the Gunn VCO frequency tuned from 12.58GHz to 12.98GHz. To excite the first higher order mode of the microstrip leaky-wave antenna is fed asymmetrically. The dominant mode excitation has been successfully suppressed by adding a sequence of covered wire in the middle line of the microstrip leaky wave antenna. This is a prototype of frequency scanning antenna using two terminal device, which can be easily scaled up to millimeter wave frequency region.     

Cycloalkylpyranones and cycloalkyldihydropyrones as HIV protease inhibitors: exploring the impact of ring size on structure-activity relationships

Previously, 3-substituted cycloalkylpyranones, such as 2d, have proven to be effective inhibitors of HIV protease. In an initial series of 3-(1-phenylpropyl) derivatives with various cycloalkyl ring sizes, the cyclooctyl analog was the most potent. We became interested in exploring the influence of other structural changes, such as substitution on the phenyl ring and saturation of the 5,6-double bond, on the cycloalkyl ring size structure-activity relationship (SAR). Saturation of the 5,6-double bond in the pyrone ring significantly impacts the SAR, altering the optimal ring size from eight to six. Substitution of a sulfonamide at the meta position of the phenyl ring dramatically increases the potency of these inhibitors, but it does not change the optimal ring size in either the cycloalkylpyranone or the cycloalkyldihydropyrone series. This work has led to the identification of compounds with superb binding affinity for the HIV protease (Ki values in the 10-50 pM range). In addition, the cycloalkyldihydropyrones showed excellent antiviral activity in cell culture, with ED50 values as low as 1 microM.     

Supercurrent versus temperature characteristics of cross-type Josephson junctions nearT c

The temperature dependence of the maximum Josephson supercurrent is studied in ranges nearT _c . The results are discussed in the framework of an approximate analysis for proximity systems based on the de Gennes theory and its application to several junctions.